How to Safely Detail Your Engine Bay: Step-by-Step Guide

Engine Bay Detailing: A Deep Clean and Factory Fresh Finish

A clean engine bay not only looks impressive but also makes maintenance easier and helps preserve the value of your vehicle. With the right products and a careful approach, you can safely remove grime, protect plastics, and restore a factory-fresh look under the bonnet. In this guide, we’ll show you step by step how to detail your engine bay using Zest Citrus Degreaser and Lasticho Tyre & Trim Dressing.

Why Detail Your Engine Bay?

Over time, engine bays collect dirt, dust, oil, and road grime. Not only does this look untidy, but built-up contaminants can also trap heat and make working on your car unpleasant. Regularly cleaning your engine bay provides:

• A cleaner, more professional appearance
• Easier maintenance and inspection of components
• Protection for plastics and rubber from drying or cracking
• Improved resale value of your vehicle

Step-by-Step Guide to Engine Bay Detailing

Step 1: Inspect the Engine Bay

Before starting, make sure the engine is cool. Cover sensitive components like exposed intakes or electrical parts if needed. Here’s how our engine bay looked before the clean:

Step 2: Apply Zest Citrus Degreaser

Dilute Zest Citrus Degreaser in a Pro Bottle for safe and effective cleaning. Generously spray onto the plastics and painted surfaces to break down grease and grime.

Step 3: Agitate With a Brush

Using a soft detailing brush, gently agitate the product to lift dirt from textured plastics and tight areas. This step ensures maximum cleaning power without damaging delicate components.

Step 4: Rinse With Low Pressure

Carefully rinse the engine bay with low-pressure water. Avoid blasting directly into electrical areas—just allow the water to carry away loosened dirt and degreaser.

Step 5: Dry Thoroughly

Using a high-quality Candy Cloth Microfibre Towel, dry all surfaces to prevent water spotting. Ensure plastics and hidden areas are wiped down before moving to the finishing step.

Step 6: Protect With Lasticho Tyre & Trim Dressing

Apply Lasticho Tyre & Trim Dressing to all plastics and rubber components. This brings back a deep, rich finish while adding UV protection to prevent fading.

Step 7: 50/50 Comparison

Here’s a side-by-side 50/50 comparison showing the difference Lasticho makes. The treated side looks rich and rejuvenated, while the untreated side appears faded and dull.

Step 8: Dress the Entire Engine Bay

Work the dressing across all plastics and trims for a consistent finish. The result is a uniform, factory-fresh look throughout the bay.

Step 9: Products Used

For this engine bay transformation, we used two key products:

• Zest Citrus Degreaser
• Lasticho Tyre & Trim Dressing

Final Results

The final engine bay is spotless, with plastics restored to a deep, rich finish. This simple process not only improves appearance but also helps protect your engine components long term.